Reinigt hier jemand mit Ultraschall? Erfahrungen?

  • Moin, ich habe angefangen meine sehr alten Märchenschallplatten zu reinigen, für die Enkelkinder...

    Die Scheiben wurden damals sehr schlecht behandelt und knisterten sehr stark.

    Nach 5 Minuten in der US wesentlich besser.


    Nur die Kratzer lassen noch von sich hören.


    Hat schon Jemand einen Adapter für Single gebaut oder Ideen? Immer einzeln und mit einem Stellring ist etwas langwierig.


    Labelschutz braucht es nicht. Da läuft nix hin.


    Single in US


    Schönes Wochenende, Hartmut

    ’’Freiheit ist das Recht, anderen zu sagen, was sie nicht hören wollen. ‘‘ George Orwell

  • Hallo AHler,


    bin gerade auf diesen Faden aufmerksam geworden. Auf 70 Seiten ist sicher sehr viel passiert... Gibt es ein Fazit aus den Entwicklungen hier und was zu empfehlen ist?


    Gruß


    Thorben

  • Mein Fazit:


    Fragen wer in der Nähe wohnt und ob man mit 3 oder x Platten zum Probewaschen kommen kann.


    Ich durfte auf dem letzten Frickelfest Essential probewaschen und hatte mich dann für mein Modell und die Reinigungsmischung entschieden.


    Wer möchte kann mich in Hamburg s Westen gerne nach Absprache besuchen. Das ginge, wenn es warm genug ist, sogar coronakonform im Garten.


    Grüße, Hartmut

    ’’Freiheit ist das Recht, anderen zu sagen, was sie nicht hören wollen. ‘‘ George Orwell

  • Moin,

    habe, zum Testen, provisorisch einen 3fach Singleadapter gebaut, aus Instalationsrohr, Heizungsrohrisolierung, Toilettenpapierolle und Gaffa.

    Das Grundprinzip funktioniert gut.


    einfacher 3 Fach Singleadapter für audioretriva US 3 Fach Singleadapter an audioretriva US 3 Fach Singleadapter auf 7mm Achse


    Schönen Sonntag, Hartmut

    ’’Freiheit ist das Recht, anderen zu sagen, was sie nicht hören wollen. ‘‘ George Orwell

  • Moin,

    habe, zum Testen, provisorisch einen 3fach Singleadapter gebaut, aus Instalationsrohr, Heizungsrohrisolierung, Toilettenpapierolle und Gaffa.

    Das Grundprinzip funktioniert gut.


    Schönen Sonntag, Hartmut

    Hartmut ..., damit hast Du den Neuererpreis 2021 gewonnen!

    MMM - Meister Messe von Morgen hießt das einst.

    Echt klasse.

  • danke, ich nehme die Medaille an. :S Als Wessi kannte ich das nicht und habe bei wiki nachgeschaut... ich finde die 180Grad-Deutung viel lustiger: "wir wurschteln weiter". Das trifft es eher. Bei der aktuellen Baumarktsituation nutze ich vermehrt die Dinge, die ich eh liegen habe. Das hat auch Vorteile.


    Ich gehe auch davon aus, das es bei dem Provisorium bleibt. Bis ich das noch einmal ordentlich gebaut habe, sind meine ca. 60 Singles schon gewaschen. Nur heute war das Wetter zu schön, um in der Bude zu hocken.

    ’’Freiheit ist das Recht, anderen zu sagen, was sie nicht hören wollen. ‘‘ George Orwell

  • Wie viele Platten in welchem Abstand reinigt ihr gleichzeitig?


    Gibt es einen optimalen Abstand (und somit Anzahl)?

    Fünft Platten pro Durchgang. Abstand müßten so 3/4 mm sein. Funktioniert super.

    Morgen nehme ich mir die selbstentwickelte Filteranlage vor. Bereits noch fünf Platten sollte die Reinigungsflüssigkeit gefiltert werden.

  • There is a calculation that can be found that shows the Maximum Surface Area that can be cleaned with a Six Litre Cleaning Tank ?


    I will see if I can find this information and post the link.

  • The Following is the information that has been researched by NASA for USB Cleaning.

    The last Section is the Alert to the Risks of Using Alcohol.

    These section s are extracted from the 'Link' I has posted recently.

    ____________________________________________


    (NASA) The sum of the parts cross-sectional area should not exceed 75% of the tank cross sectional area. The tank cross-sectional area is associated with the surface where the
    transducers are mounted. For bottom mounted transducers, the cross-sectional area is the
    tank length x width, and the record shows only its width x thickness (12” x ~0.1”). For side
    mounted transducers, the cross-sectional area is the tank height x length and the record
    shows its width x height (about 0.67 ft²/record) for a much larger cross-section. This
    suggests why stacks of multiple records “can” be cleaned with a UCM with bottom mounted
    transducers, but with some loss of efficiency. Precision Aqueous Cleaning of Vinyl Records
    Version: Second Edition March 2021
    Page 122 of 145


    Copyright 2021-Neil Antin, Some Rights Reserved; See Title Page for Use and Disclaimer


    XIV.3.d(NASA) For most effective cleaning, total parts weight should not exceed 0.351 kg/Kw of

    generator power, even though a slightly higher weigh to Kw ratio can be accommodated. If
    an ultrasonic tank has only 200 W power, then by this direction the total weight should not
    exceed 70 grams which would be only about 40% of a 180-gram record which is not much
    more than one record in an ultrasonic tank. The implication is that when cleaning a stack
    of multiple records there is likely some compromise.


    XIV.3.e(NASA) Parts positioning, important in most cleaning operations, is doubly important in

    ultrasonic cleaning. If possible, critical areas to be cleaned should face the transducer(s). This
    is intuitive except consider that Industry often cleans complex shapes with inaccessible
    areas; whereas the record in comparison is a relatively simple shape with no inaccessible
    surfaces.


    XIV.3.f (NASA) Non-rigid plastics absorb ultrasonic energy and can produce a shadowing effect. This

    can be an issue when cleaning many records at once such as the stacked capability of the
    VinylStack™ Ultra Sonic Spin (Figure 47), and other similar commercially sold units.
    Shadowing will depend on where the ultrasonic transducers are located. Vinyl records
    whose low-density material is about 22 g/in³ (compared to 127 g/in³ for stainless steel)
    will absorb ultrasonic energy. The current record spacing guidance appears based on
    various qualitative observations. There are ways to evaluate UCM performance based on
    testing for cavitation. There is the qualitative aluminum-foil test for cavitation, but it has
    limitations and the reader is directed to https://techblog.ctgclean.com/ search “aluminum
    foil” for information. There is the SonoCheck™ Healthmark Industries - Cleaning
    Verification - SonoCheck that is used to qualitatively verify cavitation intensity (suitability
    for stacked record cleaning unknown). There are quantitative ultrasonic cavitation meters
    such as https://sonicmeter.com/. However, the cost of ultrasonic cavitation meters makes
    purchase by an individual for one time use impractical.


    XIV.3.g UCMs should not be used with any flammable liquids unless explosion proof in accordance
    NFPA 70 NEC, and recall from Figure 31 that IPA at about 10% is considered flammable
    by the NFPA, and at about 7% can still produce explosive vapors. Any use of IPA in a UCM
    should not exceed 2.5% to avoid any fire and explosion hazard noting that some UCM users
    are operating as high as 45°C/113°F

  • @JohnG


    Herzlichen Dank für die sehr informative Quelle, in der beeindruckend viele Informationen zusammengetragen worden sind. Die Lektüre ist sicher sehr lohnend und aufschlussreich.

    Herzliche Grüße Uwe